maxi m u m ratings t ypical ope r ati o n c lass of t ype of s ervice p late p late p late s creen p late drive output operation voltage c urrent voltage voltage c urrent p ower p ower (volts) ( a mps) (volts) (volts) ( a mps) (watts) (kilowatts) c rf amplifer 2,000 0.25 2,000 250 0.25 2.9 0.390 c rf amplifer plate modulated 1,500 0.20 1,500 250 0.20 1.7 0.235 a b1 rf linear amplifer 2,000 0.25 2,000 350 0.25 --- 0.300 a b1 rf amplifer or modulator 2,000 0.25 2,000 350 0.50 --- 0.600 the 8560AS is intended for use as an rf amplifer or oscillator or in audio amplifer or modulation service. it has electrical characteristics simi - lar but not identical to the 4cx250b/7203. the 8560AS is designed for conduction cooling and is nominally rated for 200 watts anode dissipation. 8560 as cpi | 4 c w50,000j for information on this and other cpi products, visit our website at: www.cpii.com , or contact: cpi mpp division, eimac operation, 607 hansen way, palo alto, ca 94303 telephone : 1(800) 414-8823. fax : (650) 592-9988 | email : powergrid@cpii.com the values listed above represent specifed limits for the product and are subject to change. the data should be used for basic information only. formal, controlled specifcations may be obtained from cpi for use in equipment design. c ha r acte r istics plate dissipation (max.) 200 watts screen dissipation (max.) 12 watts grid dissipation (max.) 2 watts frequency for max. rating (cw) 500 mhz amplifcation factor 5 filament/cathode oxide coated voltage 6.3 volts current 2.6 amps capacitance grounded cathode input 16.5 pf output 4.6 pf feedthrough .04 pf capacitance --- input --- pf output --- pf feedthrough --- pf cooling conduction base 9 pin special air socket n/a air chimney --- boiler --- length 2.45 in; 62.1 mm diameter 1.63 in; 41.4 mm weight 8.2 oz; 235 gm cpi | 8560 as
|
